Products
Valves
CRANE® Cast Steel Valves
Cast steel gate, globe and check valves: proven on-off valves for steam, water, air, gas, oil and other industrial applications.
- TypesGate, globe, swing check
- Sizes2″ – 48″
- Pressure150 – 2500
- MaterialsWCB, LCC, WC6, WC9, C5, C12, CF8M
- StandardsAPI 600, API 623, API 594 Type-B, API 624
CRANE® Forged Steel Valves
Forged steel gate, globe and check valves for general industrial, oil and gas, power and commercial applications.
- TypesGate, globe, check
- Sizes¼″ – 2″
- PressureClass 800, 1500, 2500; flanged Class 150/300/600
- MaterialsA105N, F316/316L, F11, F22, F91, F304
- StandardsAPI 602, API 624, API 598, ASME B16.34, BS 5352
CRANE® FK-TrieX™
Full-bore triple offset valve for severe-service isolation, with bidirectional zero-leakage shutoff and high flow capacity (Cv).
- TypesFull-port triple offset isolation valve
- Sizes3″ – 24″, single-piece cast body
- PressureASME Class 150, 300, 600
- MaterialsStandard: WCB, CF8M, LCC, Monel®
- Temperature-60 °C to 550 °C, depending on material
CRANE® FKX9000
Triple offset valve for large-bore steam and isolation duties at high or low temperatures, with metal-to-metal bidirectional shutoff.
- BodyLug, double-flanged short and long pattern
- Sizes3″ – 64″ (DN 80 – DN 1600)
- PressureASME Class 150, 300, 600; PN 10 – 100
- MaterialsStandard: WCB, CF8M
- EmissionsISO 15848 Class BH stem seal
CRANE® Ball Valves
Ball valves in bronze, brass, lead-free brass, carbon steel and stainless steel, 100% factory tested, with pressure ratings up to 2000 CWP.
- MaterialsBronze, brass, lead-free brass, carbon, stainless steel
- Sizes¼″ – 4″
- Pressure600 CWP, 2000 CWP
- Temperature0°F to 400°F
- StandardsMSS SP-110, MSS SP-145, NSF/ANSI 61, UL, FM, CSA
CRANE® Bronze Valves
Bronze gate valves proven in commercial and industrial piping for over a century, with a wide choice of seats, discs, trims and end connections.
- MaterialsBronze
- Sizes⅛″ – 3″
- PressureClass 125, 150, 250, 300
- Temperature-20°F to 150°F
- StandardsASME B1.20.1, B16.18, B16.24, MSS SP-80
CRANE® Iron Valves
Iron body valves fully rated to ASME and MSS-SP standards, proven in the mechanical systems of commercial buildings.
- MaterialsCast iron, ductile iron, bronze
- Sizes2″ – 24″
- PressureClass 125, 150, 250, 300
- Temperature-20°F to 450°F
- StandardsAPI 594, API 598, ASME B16.1, MSS SP-70/71/85
Actuators
CRANE® 44000 Electric Actuators
Compact, maintenance-free electric actuator for small to medium valves in high-frequency service, for on/off or modulating duty, with self-locking worm gear and built-in position indicator.
- OperationOn/off or modulating
- Sizes¼″ – 24″
- Temperature-25°C to +55°C
- FeaturesSpace heater; limit switches; optional 4–20 mA positioner
CRANE® Air Rack and Pinion Pneumatic Actuator
Aluminium-alloy rack and pinion actuator, single or double acting, direct-mounted on Center Line® valves, with NAMUR accessory interfaces.
- MaterialsAluminium alloy housing, hard-anodised shaft
- Pressure40 – 120 psi (2.75 – 8.27 bar)
- Temperature-20°C to +80°C
- FeaturesTorque 12 – 4000 Nm, 12 sizes
- StandardsISO 5211, NAMUR
CRANE® Electric Actuators Series CKD
Electric actuator for a wide torque range with sealed housing, self-diagnosis and built-in protection against overload, jamming and over-torque, plus a manual backup operator.
- TypesMulti-turn, quarter-turn, linear
- Features1- or 3-phase, max 690 V, 50/60 Hz
- Temperature-50°C to 150°C
- OperationOn/off and regulating
CRANE® Scotch Yoke Actuators
Pneumatic or hydraulic scotch yoke actuators for on/off and control service, offering a higher torque range than rack and pinion designs, with manual override options.
- BodyCarbon steel or ductile iron centre-body
- FeaturesUp to 110,000 Nm (spring return), 240,000 Nm (double acting)
- Pressure3 – 10 bar
- Temperature-20°C to +80°C (std); high/low temp versions
Controls & Accessories
CRANE® Positioner, C100 Series
Valve positioner with a powder-coated cast aluminium housing, stainless retained fasteners and simple external zero calibration.
- MaterialsCast aluminium, polyester powder coated
- FeaturesNEMA 4X / IP66; NAMUR or ½″ square drive
- Temperature-40°F to 185°F
- StandardsFM, CSA, Cenelec
CRANE® Limit Switch, CCA Series
Compact, low-cost limit switch for visual and remote electrical indication of rotary valve/actuator position.
- MaterialsPolycarbonate, aluminium, stainless steel
- FeaturesNEMA 4/4X; mechanical or inductive switches
- Temperature-40°F to +176°F
CRANE® Limit Switch, CCR Series
The most economical compact limit switch for visual and remote electrical indication of rotary valve/actuator position.
- MaterialsReinforced Noryl, polycarbonate, stainless steel
- FeaturesNEMA 4/4X, IP65; mechanical or inductive switches
- Temperature-10°C to +80°C
CRANE® Limit Switch, CXA Series
Limit switch with epoxy-coated aluminium housing for visual and remote indication, with optional 4–20 mA feedback and three-position control.
- MaterialsPowder-coated aluminium, stainless steel
- FeaturesNEMA 4/4X/7/9; 4–20 mA transmitter option
- Temperature-40°C to +80°C
Need quality valves for your process?
Please feel free to contact our engineers and sales team.